Building Permits in ZIP 78734

200amp panel 200amp meter grounding

REQUEST TO DISCONNECT. Installing a 10.12 kW PV system and (2) Tesla Inc. 1707000-XX-Y inverters/batteries.

Replace corroded Main Electrical Panel.

Request to disconnect. Replace existing 200A main electric panel with new 200A main electric panel with new 200A main breaker. This is a simple panel swap. Existing meter can to remain in place.

Replace 8secondary wire. Repair pipe between meter box and breaker panel. This is the notes per Austin Energy requested. **Disconnect/Reconnect

ETJ New Construction of SFR 8553sqft meter installation

New 1-story SFR w/ 1 bedrooms 1 bathrooms *VESTED RIGHTS DETERMINATION* (See Revision 1)

New 1-story SFR w/ 1 bedrooms 1 bathrooms *VESTED RIGHTS DETERMINATION* (See Revision 1)

Install new 13.20 kW DC rooftop solar system to existing residential

Relocate the existing 200amp meter loop to new location with in the same property on a new rack 4 galvanized square tubing

We are needing meter service release 200 amp I have attached approved espa.

We have an existing permit (2026-011361 EP) but in order to close spot we are in need of t-pole per spotter note below: 2/4/26 (EC WILL NEED TO GET A T-POLE to safely build garage as of right now the...

Electrical permit for main service of house built on a rack. Permit 2024-079453 EP was issued for this address. Owner decided they wanted the main service to be built on a rack instead of on the side...

direct swap of 200 amp main breaker panel *Disconnect and Reconnect Only

we are rebuilding the service putting in 3 meters versus 2 on a single rack. MC1 servicing 3 mobile homes. Relocate 2 services and trench power back to 15002 JULIE LANE . Install new meter on rack and...

Installation of a GENERAC 26 KW AIR-COOLED STANDBY GENERATOR (MODEL #G007327-0)

HBL Construction Loop. ETJ

New Construction in the ETJ SFR

temporary tpole for new construction in Austin City Homes

ETJ Rotted pole at base needs to be replaced